Convert a ring size between the US, UK and European systems, or find the size from a ring's inside diameter or inside circumference in millimetres. The chart below lists every half size from US 3 to US 13.

Ring size converter

US & Canada7
UK & AustraliaN½
Europe (ISO)54
Inside diameter17.3 mm
Inside circumference54.4 mm

US sizes are shown to the nearest quarter size and UK sizes to the nearest half size.

Ring size chart

Inside diameter is measured straight across the inside of the ring. Inside circumference is the length around the inside, and it is the same number as the European (ISO 8653) size.

Ring sizes from US 3 to US 13
US & Canada UK & Australia Europe (ISO) Inside diameter (mm) Inside circumference (mm)
3 F½ 44 14.1 44.2
3½ G½ 45 14.5 45.5
4 H½ 47 14.9 46.8
4½ I½ 48 15.3 48.0
5 J½ 49 15.7 49.3
5½ K½ 51 16.1 50.6
6 L½ 52 16.5 51.9
6½ M½ 53 16.9 53.1
7 N½ 54 17.3 54.4
7½ O½ 56 17.7 55.7
8 P½ 57 18.1 57.0
8½ Q½ 58 18.5 58.2
9 R½ 60 18.9 59.5
9½ S½ 61 19.4 60.8
10 T½ 62 19.8 62.1
10½ U½ 63 20.2 63.3
11 V½ 65 20.6 64.6
11½ W½ 66 21.0 65.9
12 X½ 67 21.4 67.2
12½ Z 68 21.8 68.5
13 Z+1 70 22.2 69.7

How to measure ring size

1. Measure a ring that already fits

Lay the ring on a ruler or hold it in a caliper and measure the inside diameter in millimetres, straight across the widest point. Choose "Inside diameter (mm)" in the converter and type the number.

2. Measure the finger

Wrap a thin strip of paper around the base of the finger, mark where the paper overlaps and measure that length in millimetres. This is the inside circumference: choose "Inside circumference (mm)" in the converter. Paper stretches less than string, so it gives a truer reading.

3. Use a ring sizer and a ring mandrel

Jewellers use a set of ring sizers (finger gauges) to find the size on the hand, and a marked ring mandrel to read the size of a finished ring. This is the most accurate way, and it is how shops size rings before they cut, stretch or solder them.

Tips for the right fit

  • Wide bands, about 6 mm and wider, fit tighter than thin ones. Go up half a size.
  • Measure at the end of the day, when fingers are warm. Cold fingers are smaller.
  • The ring must slide over the knuckle. If the knuckle is large, measure it as well and pick the size between the two.
  • When you are between two sizes, choose the larger one.

Tools for sizing rings

Pik Pak Tools has made jewellery tools since 1985 for importers, wholesalers and distributors. These are the tools jewellers use to size, hold and adjust rings:

Questions

What is a US size 7 in UK and European sizes?

A US 7 ring is about N½ in the UK and 54 in Europe. Its inside diameter is about 17.3 mm.

Is the European ring size the same as the circumference?

Yes. European sizes follow ISO 8653, where the size is the inside circumference in millimetres. A size 54 ring is about 54 mm around the inside.

How much bigger is one US ring size?

One full US size adds about 0.81 mm to the inside diameter, or about 2.55 mm to the circumference. A half size adds half of that.

How exact is this ring size converter?

It uses the common US formula, the UK standard (BS 6820) and the European standard (ISO 8653). Ring makers can differ by a fraction of a size, so check with a ring sizer before an important order.

More free tools: need the thickness of jewellery wire? See the wire gauge chart (AWG & SWG to mm).

Buying jewellery tools for your business? We make ring mandrels, sizers, pliers and cutters for trade buyers, with custom branding for private label orders.

Contact us Custom product