Wire Gauge Chart (AWG & SWG)
Gauge to mm and inches for jewellery wireJewellery wire is sold by gauge or by its thickness in millimetres. The USA uses AWG (American Wire Gauge, also called Brown & Sharpe) and the UK uses SWG (Standard Wire Gauge). The same number is not the same thickness: 18 gauge is 1.02 mm in AWG but 1.22 mm in SWG. A higher gauge number always means thinner wire.
Wire gauge converter
The nearest gauges are the closest sizes in the chart below.
Wire gauge chart: AWG and SWG in mm and inches
Diameters for gauge 0 to 36. AWG values come from the standard AWG formula; SWG values are the British Imperial Standard Wire Gauge.
| Gauge | AWG (mm) | AWG (inch) | SWG (mm) | SWG (inch) |
|---|---|---|---|---|
| 0 | 8.251 | 0.3249 | 8.230 | 0.3240 |
| 1 | 7.348 | 0.2893 | 7.620 | 0.3000 |
| 2 | 6.544 | 0.2576 | 7.010 | 0.2760 |
| 3 | 5.827 | 0.2294 | 6.401 | 0.2520 |
| 4 | 5.189 | 0.2043 | 5.893 | 0.2320 |
| 5 | 4.621 | 0.1819 | 5.385 | 0.2120 |
| 6 | 4.115 | 0.1620 | 4.877 | 0.1920 |
| 7 | 3.665 | 0.1443 | 4.470 | 0.1760 |
| 8 | 3.264 | 0.1285 | 4.064 | 0.1600 |
| 9 | 2.906 | 0.1144 | 3.658 | 0.1440 |
| 10 | 2.588 | 0.1019 | 3.251 | 0.1280 |
| 11 | 2.305 | 0.0907 | 2.946 | 0.1160 |
| 12 | 2.053 | 0.0808 | 2.642 | 0.1040 |
| 13 | 1.828 | 0.0720 | 2.337 | 0.0920 |
| 14 | 1.628 | 0.0641 | 2.032 | 0.0800 |
| 15 | 1.450 | 0.0571 | 1.829 | 0.0720 |
| 16 | 1.291 | 0.0508 | 1.626 | 0.0640 |
| 17 | 1.150 | 0.0453 | 1.422 | 0.0560 |
| 18 | 1.024 | 0.0403 | 1.219 | 0.0480 |
| 19 | 0.912 | 0.0359 | 1.016 | 0.0400 |
| 20 | 0.812 | 0.0320 | 0.914 | 0.0360 |
| 21 | 0.723 | 0.0285 | 0.813 | 0.0320 |
| 22 | 0.644 | 0.0253 | 0.711 | 0.0280 |
| 23 | 0.573 | 0.0226 | 0.610 | 0.0240 |
| 24 | 0.511 | 0.0201 | 0.559 | 0.0220 |
| 25 | 0.455 | 0.0179 | 0.508 | 0.0200 |
| 26 | 0.405 | 0.0159 | 0.457 | 0.0180 |
| 27 | 0.361 | 0.0142 | 0.417 | 0.0164 |
| 28 | 0.321 | 0.0126 | 0.376 | 0.0148 |
| 29 | 0.286 | 0.0113 | 0.345 | 0.0136 |
| 30 | 0.255 | 0.0100 | 0.315 | 0.0124 |
| 31 | 0.227 | 0.0089 | 0.295 | 0.0116 |
| 32 | 0.202 | 0.0080 | 0.274 | 0.0108 |
| 33 | 0.180 | 0.0071 | 0.254 | 0.0100 |
| 34 | 0.160 | 0.0063 | 0.234 | 0.0092 |
| 35 | 0.143 | 0.0056 | 0.213 | 0.0084 |
| 36 | 0.127 | 0.0050 | 0.193 | 0.0076 |
Which wire gauge to use
Common starting points for jewellery work. The right gauge also depends on the metal and how hard it is: half-hard wire holds its shape better than dead-soft wire of the same gauge.
| Use | Common AWG | About (mm) |
|---|---|---|
| Ring shanks and bangles | 10 to 14 | 2.6 to 1.6 |
| Clasps, hooks and heavy jump rings | 14 to 16 | 1.6 to 1.3 |
| Jump rings and chain links | 16 to 20 | 1.3 to 0.8 |
| Wire wrapping frames | 18 to 20 | 1.0 to 0.8 |
| Ear wires (earring hooks) | 20 to 21 | 0.8 to 0.7 |
| Head pins and eye pins | 21 to 24 | 0.7 to 0.5 |
| Weaving, binding and coiling wire | 24 to 28 | 0.5 to 0.3 |
How to measure wire thickness
Push the wire into the slots of a wire gauge plate (the slots, not the round holes) and find the narrowest slot it fits without forcing. For an exact reading in millimetres, use a caliper or a micrometer, and measure in two directions in case the wire is slightly oval.
Flush cutters are made for soft wire such as copper, silver and gold. Cut steel or memory wire with a heavy-duty cutter, or the jaws can chip.
Tools for wire work
Pik Pak Tools has made jewellery tools since 1985 for importers, wholesalers and distributors. These are the tools jewellers use to bend, cut and measure wire:
- Wire Wrapping PliersRound, stepped and looping jaws for loops and coils
- Flush & Side CuttersClean, flat cuts on soft jewellery wire
- Parallel Action PliersJaws close flat to grip wire along its length
- Draw Tongs & Wire Pulling PliersPull wire through a draw plate
- Calipers, Dividers & GaugesMeasure wire and sheet thickness
- Wire Pliers SetsMatched pliers for wire jewellery
Questions
Is 18 gauge wire thicker than 20 gauge?
Yes. The higher the gauge number, the thinner the wire. 18 AWG is about 1.02 mm and 20 AWG is about 0.81 mm.
What gauge is 1 mm wire?
1 mm wire is closest to 18 AWG (1.024 mm) and 19 SWG (1.016 mm).
What is the difference between AWG and SWG?
AWG is the American standard: each gauge is about 11% thinner than the one before it. SWG is the British standard from 1883 and has its own table. In the sizes used for jewellery, SWG wire is a little thicker than AWG wire with the same number, so always check which system a supplier uses.
Which gauge is best for jump rings?
Most jump rings are made from 16 to 20 AWG wire (1.3 to 0.8 mm). Heavier chains and clasps use 14 to 16 AWG; fine chains use 20 to 22 AWG.
More free tools: convert US, UK and European ring sizes with the ring size converter and chart.
Buying jewellery tools for your business? We make pliers, cutters and measuring tools for trade buyers, with custom branding for private label orders.
Contact us Custom product